things to note when using eva solar photovoltaic film

things to note when using eva solar photovoltaic film:

the film should not be exposed to outside air for a long time

the performance gradually decreases, and it will not be fully cross-linked in about 3 days, resulting in delamination of the glass and backplane, bulging at the positioning tape, blackening of the welding ribbon bus strip, yellowing of eva and other appearance quality problems.

store in an ambient room temperature of 30°c and a humidity of 65% or above

will cause quality deterioration and dimensional changes, and the adhesion between the adhesive films

if it is heated above 170°c during lamination

will cause the quality of the resin itself to deteriorate (decompose)

do not touch the film directly with your hands

oil and hand cream on hands can cause quality deterioration, poor adhesion, and discoloration

avoid contact with water, oil, organic solvents, and drugs

will cause quality deterioration, poor bonding, and bubbles

cannot be used in factories with open windows or in places with a lot of garbage and dust

it will cause low adhesion and insufficient power of the battery panel.

must be laminated at a certain room temperature

changes in the temperature of the hot plate of the laminator may result in insufficient cross-linking or excessive heating.