eva photovoltaic film 0.35mm customize

product parameters

●1. excellent weather resistance, including resistance to high temperature, high humidity, uv and other characteristics.
●2. it has good adhesion with various materials such as glass, metal, and polymer backplane and maintains it for a long time.
●3.excellent light transmittance.
●4. good operability, easier to stack, short lamination time and high efficiency.
●5. easy to store. stored at room temperature, the adhesion of eva is not affected by humidity and water-absorbent film.
●6. low melting point, easy to flow, suitable for lamination process of various glass, such as patterned glass, tempered glass
glass, curved glass, etc.

store

must be stored in a dry, cool and constant temperature room

temperature 0~30℃, humidity ≤60%;

the storage period of this product is 6 months from the date of production

application

1. make sure to store and use eva film in a room with constant temperature and humidity.

2. in order to avoid component lamination abnormalities caused by static electricity, it is recommended to eliminate static electricity throughout the component process.

3. the eva film cut into sheets should be sealed and stored to avoid contamination and moisture, and relevant facilities should be set up to avoid mosquito contamination.
4. it is recommended that the circle close to the paper tube and the outer circle of each roll should not be used.